Total Saw Solutions
Total Saw Solutions
return to main Low Cost Import Saw page

 

Glue Joint Rip Saws
Diameter Teeth Design Kerf Plate Bore Hook Order ID Price
10" 30T TCG .125" .087" 5/8" 20 GJ1030125 74.00
10" 30T TCG .145" .102" 5/8" 20 GJ1030 106.00
12" 36T TCG .160" .118" 1" 20 GJ1236 110.00
12" 36T TCG .160" .118" 70mm, 2 key 20 GJ1236K 114.00
12" 36T TCG .160" .118" 3-1/8" 20 GJM1236157* 120.00
12" 48T ATB .157" .118" 1" 20 GJ1248ATB 144.00
12" 50T LRLRS .134" .094" 1" 20 GJL1250 142.00
300mm 36T TCG 4.2mm 3.2mm ***80mm, 2 key 20 GJRM30036 116.00
300mm 48T TCG 2.8mm 2.0mm ***80mm, 2 key 20 GJRM3004828 128.00
14" 36T TCG .177" .138" 1" 20 GJ1436177 140.00
14" 36T ATB .177" .138" 2", 2 PH 20 GJ1436DA** 140.00
14" 36T TCG .177" .138" 2", 2 PH 20 GJ1436DT** 140.00
14" 36T TCG .177" .138" 3-1/8" 20 GJM1436T 140.00
16" 36T TCG .177" .138" 2", 2 PH 20 GJ1636** 154.00
16" 50T TCG .197" .138" 1" 20 GJ1650 184.00.00
18" 48T TCG .180" .138" 2", 2 PH 20 GJ1848** 200.00

Designed for operations requiring an extra smooth cut, such as solid wood pieces that will be glued together. Use these blades for rip cuts only. Glue Joint Rip Saws can be bored out to fit most gang rip saws. Please call for information and price on this service.

* Designed for Mereen-Johnson rip saws with 3-1/8" arbor and with one 1/4" keyway.
** Specially designed for cutting with Diehl saws, 9/16" pin hole at 5" bolt circle.
*** For Raimann Rip Saw with 4 small 7mm pins & 2 large 14mm pins, plus 2 keyways.