 |
 |
 |
 |
 |
These saws are designed for high production cutting of natural woods, plywood, chipboard, and MDF. The TCG teeth offer less wear than the ATB with nearly the same quality of cut. Blades designated by the prefix GTM contain Micro-Sheen C-4 sub-micron carbide, which provides for a longer tool life. The blades designated by the prefix GTL have laser cuts in the body to help reduce noise.
| Diameter | Teeth | Design | Kerf | Plate | Bore | Hook | Order ID | Price |
|---|---|---|---|---|---|---|---|---|
| 7-1/4" | 40T | TCG | .110" | .079" | 5/8" | 10 | GT740 | 73.00 |
| 7-1/4" | 60T | TCG | .110" | .079" | 5/8" | 10 | GT760 | 85.00 |
| 8" | 40T | TCG | .118" | .079" | 5/8" | 10 | GT840 | 76.00 |
| 8" | 60T | TCG | .118" | .079" | 5/8" | 10 | GT860 | 95.00 |
| 220mm | 64T | TCG | 3.2mm | 2.2mm | 30mm, 2/7/42 | 10 | GTM22064 | 99.00 |
| 250mm | 60T | TCG | 3.2mm | 2.2mm | 30mm, 2/7/42 | 10 | GTM2503060 | 68.00 |
| 250mm | 80T | TCG | 3.2mm | 2.2mm | 30mm, 2/7/42 | 10 | GTM2503080 | 86.00 |
| 10" | 40T | TCG | .126" | .087" | 5/8" | 10 | GT1040 | 61.00 |
| 10" | 40T | TCG | .126" | .087" | 5/8" | 10 | GTM1040 | 74.00 |
| 10" | 60T | TCG | .126" | .087" | 5/8" | 10 | GT1060 | 62.00 |
| 10" | 60T | TCG | .126" | .087" | 5/8" | 10 | GTM1060 | 76.00 |
| 10" | 60T | TCG | .126" | .087" | 5/8" | 10 | GTL1060 | 76.00 |
| 10" | 80T | TCG | .126" | .087" | 5/8" | 10 | GT1080 | 79.00 |
| 10" | 80T | TCG | .126" | .087" | 5/8" | 10 | GTM1080 | 90.00 |
| 10" | 80T | TCG | .126" | .087" | 5/8" | 10 | GTL1080 | 90.00 |
| 10" | 80T | TCG | .126" | .087" | 5/8" | -5 | LM1080TCG | 106.00 |
| 10" | 100T | TCG | .126" | .087" | 5/8" | 10 | GT1010 | 150.00 |
| 300mm | 72T | TCG | 3.2mm | 2.2mm | 30mm, 2+2 PH | 10 | GTM3003072 | 102.00 |
| 300mm | 96T | TCG | 3.2mm | 2.2mm | 30mm, 2+2 PH | 10 | GTM3003096 | 113.00 |
| 12" | 48T | TCG | .134" | .094" | 1" | 10 | GT1248 | 92.00 |
| 12" | 60T | TCG | .134" | .094" | 1" | 10 | GT1260 | 83.00 |
| 12" | 72T | TCG | .134" | .094" | 1" | 10 | GTM1272 | 113.00 |
| 12" | 80T | TCG | .134" | .094" | 1" | 10 | GT1280 | 103.00 |
| 12" | 80T | TCG | .134" | .094" | 1" | 10 | GTM1280 | 126.00 |
| 12" | 96T | TCG | .142" | .102" | 1" | 10 | GTM1296 | 147.00 |
| 350mm | 54T | TCG | .138" | .094" | 30mm | 10 | GTM3503054 | 104.00 |
| 350mm | 80T | TCG | 3.5mm | 2.5mm | 30mm, 2+2 PH | 10 | GTM3503080 | 147.00 |
| 350mm | 96T | TCG | 3.5mm | 2.5mm | 30mm, 2+2 PH | 10 | GTM3503096 | 165.00 |
| 14" | 54T | TCG | .138" | .094" | 1" | 10 | GTM1454 | 117.00 |
| 14" | 60T | TCG | .157" | .118" | 1" | 10 | GT1460 | 146.00 |
| 14" | 80T | TCG | .157" | .118" | 1" | 10 | GT1480 | 164.00 |
| 14" | 100T | TCG | .157" | .118" | 1" | 10 | GT1410 | 191.00 |
| 16" | 60T | TCG | .165" | .126" | 1" | 10 | GT1660 | 184.00 |
| 16" | 80T | TCG | .165" | .126" | 1" | 10 | GT1680 | 210.00 |
| 16" | 100T | TCG | .165" | .126" | 1" | 10 | GT1610 | 244.00 |
| 16" | 100T | TCG | .165" | .126" | 1" | -5 | GTM1610* | 263.00 |
| 16" | 120T | TCG | .165" | .126" | 1" | 10 | GT1612 | 244.00 |
| 16" | 120T | TCG | .165" | .126" | 1" | -5 | GTM1612* | 265.00 |
| 18" | 40T | TCG | .180" | .134" | 1" | 10 | GT1840 | 233.00 |
| 18" | 60T | TCG | 180" | .134" | 1" | 10 | GT1860 | 255.00 |
| 18" | 80T | TCG | .180" | .134" | 1" | 10 | GT1880 | 277.00 |
| 18" | 100T | TCG | .180" | .134" | 1" | 10 | GT1810 | 313.00 |
| 18" | 100T | TCG | .180" | .134" | 1" | -5 | GTM1810* | 311.00 |
| 18" | 120T | TCG | .180" | .134" | 1" | 10 | GT1812 | 318.00 |
| 18" | 120T | TCG | .180" | .134" | 1" | -5 | GTM1812* | 323.00 |
| 20" | 60T | TCG | .180" | .134" | 1" | 10 | GT2060 | 307.00 |
| 20" | 80T | TCG | .180" | .134" | 1" | 10 | GT2080 | 314.00 |
| 20" | 100T | TCG | .180" | .134" | 1" | 10 | GT2010 | 352.00 |
| 20" | 120T | TCG | .180" | .134" | 1" | 10 | GT2012 | 370.00 |
Copyright 2011 Total Saw Solutions - All Rights Reserved.
Total Saw Solutions
W4481 S. Cherry Rd.
Phillips, WI 54555
1-800-773-3133
Email Us
